18 Years Factory offer Siway PU FOAM to Kazakhstan Factory

18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory
  • 18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory
  • 18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory
  • 18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory18 Years Factory offer
 Siway PU FOAM to Kazakhstan Factory

Short Description:

Description This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;   Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials   Basic Application 1.Doors and Windows a...


Product Detail

Attentions

Application

Product Tags

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of 18 Years Factory offer Siway PU FOAM to Kazakhstan Factory, Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.


Description

This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

 

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

 

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

 

Technical data sheet

Project

Value

Density, Kg/m³,Not less

10

Thermal conductivity,35℃,W/(m·K) no more than

0.050

Dimensional stability(23±2)℃,48,h no more than

5

Operating temperature

-10~+35℃

Optimum operating temperature

+18~+25℃

Temperature range(After curing)

-35~+80℃

Tensile bond strength

kPa

Not less

Aluminum plate

Standard condition,7d

80

Immersion,7d

60

PVC plate

Standard condition,7d

80

Immersion,7d

60

Cement Plate

Standard condition,7d

60

Shear strength,kpa,Not less

80

Foam expansion ratio,Not less

Standard value-10

 

Certification

JC 936-2004

 

Color

White

 

Package

750ml in Bottle * 12 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • ***VISIT OUR SPONSORS***
    https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com

    Hot to install a wash basin waste pipe and check for leaks. Include how to use solvent weld waste fittings and plastic waste pipe compression fittings. For more information visit our website at https://www.plumberparts.co.uk

    Word, and welcome to this plumberparts.co.uk video. This is the last video of this particular set of episodes, all about how to install a wash basin. If you want to know anything about the previous things, go back through the videos, and you’ll see them there. This particular bit is about installing the waste. It’s the last part, so let’s get all that done, and hopefully have it running by the end of the video.
    Right, so here’s our outlet waste, here. We’ve got a pop-in waste that we did earlier. We’ve got all our pipes in that we did earlier. Our two valves, and here’s the waste outlet, here. Let’s first have a look at the sealing components of the trap. This is known as a P-trap. So the sealing part here, you’ve got a rubber ring, and that seals on the bottom of this metal thread, here. But it also sits around the collar, in there. Generally, you aren’t to take this off, but I’m only doing it for demonstration purposes. So that will sit up on there like that, and seal really well on there.
    On this end, we’ve got the compression fitting end. And how this works, is you have a slip collar. When you’re tightening up this nut, if this slip collar wasn’t here, it would drag on this rubber bit here, which is the bit that causes the seal. So the slip collar goes in there, the rubber flat seal goes in there, your part will go in and around that inner circle, around there, like that. The seal sits round in there like that, and that’s where it causes a seal. The slip collar goes on there, the nut goes on there. And that tightens up, and causes a great seal.
    A few of the other things, I’m actually gonna glue things, today, and solvent weld once, alright? If you want to know how to use those, go back to our video page, and we’ve got a video up there for you on how to use solvent weld fittings for waste.
    So, the first bit we’re gonna do here, anyway, is attach this P-trap, and then we’ve got a rough idea if the bit’s a part we need to cut, and where to put our elbows and stuff to match these two up together. So, let’s pop that up on there. Let’s get that in there like that. Alright, so, what we’re gonna need here, to get this bit done, is two elbows. So, we’ll have one elbow popped on there like that, and we’ll need another one put in here about there. So what I need to do now is cut my pipes to length, glue them in. Get them so they’re popping into
    this compression fitting here, tighten that up, wait five minutes for the solvent weld to go off, and then, hopefully, I can turn these two valves on and test for leaks.
    Right, are you ready? Are you set? We’re gonna turn it on, and see if it works. No leaks, so far. Oh, yeah! Turn it all the way around. Nice and hot. Cold. Yeah! Pull this old boy, is it up or down? Push it down, oh yeah. There we go. No leaks down here. Nothing at all.
    We shut the pipe, and now we test this overflow. It’s gonna over the flow. And that would mean we’re testing our plumber’s mate that we did a few videos ago. It’s feeding it nicely. That’s great. Well, as you can see, all is well. So there you go, it’s all done. The basin, hot works fine, all the waste draining really well, switch over to the two. Nice little mixed tap. Our pop-up waste works well, all of that bit. And it’s all done. I am so happy.
    If you need anymore help, or any more advice, visit our website at plumberparts.co.uk. If you feel like we’ve missed anything out, or anything like that, let us know through our comments list, or just message us directly. Remember to subscribe.
    Thanks ever so much for watching. I’ll see you soon. Brut-ting! Plumberparts.co.uk – honest reviews and advice.



    Akfix 310 Montage Adhesive (Instant Grab)

    Akfix 310 is a water-based adhesive used for bonding numerous building materials. It is particularly suitable for DIY users due to solvent-free content and high bonding strength.

    * Acrylic dispersion based
    * Good gap-filling capacity on rough surfaces
    * Suitable for both indoor and outdoor applications
    * Weatherproof
    * Over paintable
    * Low odour
    * Solvent-free

    Related Products

    WhatsApp Online Chat !