16 Years manufacturer SV-312 Polyurethane Sealant for Windshield Glazing Export to Roman
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
Our company promises all users of the first-class products and the most satisfying post-sale service. We warmly welcome our regular and new customers to join us for 16 Years manufacturer SV-312 Polyurethane Sealant for Windshield Glazing Export to Roman, We warmly welcome your participation based on mutual benefits in the near future.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
| Test standard | Test project | Unit | value |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
| GB/T 2793 | Non-volatile components | % | ≥96 |
| GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
| GB/T 528 | Elongation at break | % | ≥400% |
| GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
BEST T.P.S. is liquid vulcanized rubber.
It is inserted into the tyre through the valve, (no downtimes for application)
Inserted only ONCE in the lifetime of the tyre, (no need to change, no matter how many years the tyre is operational on the machine)
Remains liquid for all years and creates an air-proof layer inside the tyre, covering the ENTIRE internal area. This layer does not permit air to escape.
Sealing air leakages from very difficult areas like:
the O-ring in split type rims
the bead (bead leakages are not to be confused with O-ring leakages, as the O-ring is almost 5 to 10 cm away from the bead)
Seals ALL pores. Pores are very often found in low cost tyres
Creates patches on the tread area, if the tyre is punctured.
Finally but certainly most importantly, BEST T.P.S. is the UNIQUE solution to save leakages from separation (bulges or bubbles) of the tyre layers.
https://www.oxo.com/p-771-silicone-sink-strainer-stopper.aspx
The OXO Good Grips Silicone Sink Strainer & Stopper combines sleek stainless steel with a flexible, stain-resistant silicone basket and drop-down Stopper. The easy-to-clean silicone basket traps food debris to prevent clogs. To empty the Strainer, simply pick it up by the center post and invert the silicone basket for easy debris removal. To stop the sink to fill it with water, just give the large, comfortable knob a quarter turn in any direction and the Stopper drops down for soaking dishes or pans. You’ll know that you’ve gone from strain to stop or vice versa when the post clicks into place. A silicone underside won’t scratch the sink basin.
