14 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Boston Importers
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for 14 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Boston Importers, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Heat resistant products for fireplaces and stoves are many and varied, made to suit specific conditions. The products needed will vary based on whether the application is an open fire, free standing stove, or cassette fireplace.
Fire bricks, or refractory bricks, are used to line kilns, furnaces, and fireplaces. These bricks are made to withstand high temperatures, and they also have low thermal conductivity for energy savings. For applications typical in homes, such as natural gas fireplaces, more porous bricks can be used instead of the dense bricks used in wood-fired kilns or furnaces. The more porous bricks are much lighter and insulate better than dense bricks due to the tiny air pockets located throughout.
With open fires that use gas or solid fuel, a product called fire cement can be used to do small repairs to joints and cracks. Larger repairs can be done using fireplaace render or heatproof screed, a products that can withstand very high temperatures. If you need to fix tiles in part of your fireplace exposed to heat, you can use heat resistant tile adhesive.
If you are building a new fireplace or opening a chimney breast to create one, you can line the opening with fire bricks set in place with heatproof mortar. The mortar joints should be thin: 3 to 5 mm. Generally speaking, 10 kg of heatproof mortar can be used to place 100 standard sized fire bricks. Alternately, you can render over the existing brickwork with Fireplace Render to a thickness of approximately one inch. Heatproof Screed can also be used to create a base for the fire area. Free standing stoves can be lined with Fireplace Render as well.
Cassette fires (sometimes called “hole in the wall” fires) should have the area around the fire opening lined with heat resistant plaster that is made just for these kinds of fireplaces. Heat Resistant Plater is made to go onto Fireplace Render. This can be applied up to 5 mm thick.
You can also obtain a number of other heat resistant products for fireplaces. Special mortars and adhesives with high levels of silica are made for use with chamotte bricks, ceramic fiber, and insulating bricks. High alumina refractory mortars used with high aluminum refractory bricks are also available. The cements and mortars with the highest alumina content are also suitable with mag-chrome or magnesite bricks.
Premium fire cements come in beige or black and can be used for a number of applications domestically as well as industrially. Fire cement can be used in fireplace repairs, and in the assembly of cast iron stoves.
