14 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B to Hungary Factory
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for 14 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B to Hungary Factory, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
| Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
| Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
| Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
| Stone – stainless steel/ Standard conditions | ≥12 | ||||
| Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing | |||||
| attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
| Colour | gray | white | grey | ||
| Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
| Viscosity（PaS） | 200-400 | 150-250 | |||
| Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
BEST T.P.S. is liquid vulcanized rubber.
It is inserted into the tyre through the valve, (no downtimes for application)
Inserted only ONCE in the lifetime of the tyre, (no need to change, no matter how many years the tyre is operational on the machine)
Remains liquid for all years and creates an air-proof layer inside the tyre, covering the ENTIRE internal area. This layer does not permit air to escape.
Sealing air leakages from very difficult areas like:
the O-ring in split type rims
the bead (bead leakages are not to be confused with O-ring leakages, as the O-ring is almost 5 to 10 cm away from the bead)
Seals ALL pores. Pores are very often found in low cost tyres
Creates patches on the tread area, if the tyre is punctured.
Finally but certainly most importantly, BEST T.P.S. is the UNIQUE solution to save leakages from separation (bulges or bubbles) of the tyre layers.
If any question or need of the silicone, pls contact with Firleanna freely
hyjb@szrl.net
firleanna@gmail.com
Skype: hy-firleanna
Tel: 86-18938867520
Shenzhen Hong Ye Jie Technology Co., Ltd.
Website: https://www.szrl.net
