13 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Israel Importers

13 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Israel Importers
  • 13 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Israel Importers13 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Israel Importers

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 13 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Israel Importers, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Create your own molds in a very inexpensive way, with only corn starch and silicone. The silicone caulk must be 100% silicone and clear for it to work properly.

    Depending on how thick your mold is, it could take only a few minutes to about an hour to dry and be ready for casting. To cast, I use jewelry resin, but I’m sure you can also use plaster or clay. I have not yet tried making 3 dimensional molds, but I’m sure the process is not difficult, just a little more time consuming.

    To do this, you might want to try separating your object into 2 or more sections with something like thin plastic sheets or cardboard. Then applying the silicon to each section, letting it dry and then separating your mold from the object. Put the mold pieces together and make sure they stay securely in place and aligned to one another by using rubber bands. Pour your casting material through a hole that you created during mold making or afterwards. Let it dry.

    These instructions for 3 dimensional mold making are really just my guess and how I would go about it. If you have a better way or find an awesome video, let me know! I’d like to try it out too.



    Sealant Technologies provides air sealing technologies and resources for businesses integrating patented chemicals, equipment and processes. We have air sealing solutions for residential & commercial construction, bio-security, agriculture, corrosion prevention, urea coatings and many other markets where sealants can provide a significant return on investment. Sealant Technologies is also a leader in the development of portable spray foam equipment and the patent pending Spray Pod 1.0 allows almost any business to develop their own energy efficiency program. For more information regarding the AireBarrier Black Spray Sealant, visit our websites or call us at 877-575-SEAL.

    www.SealantTech.com

    www.SprayPods.com

    www.SpraySealants.com

    Related Products

    WhatsApp Online Chat !