12 Years Manufacturer SV-9300 Fireproof silicone sealant for Seychelles Manufacturer

12 Years Manufacturer
 SV-9300 Fireproof silicone sealant for Seychelles Manufacturer
  • 12 Years Manufacturer
 SV-9300 Fireproof silicone sealant for Seychelles Manufacturer12 Years Manufacturer
 SV-9300 Fireproof silicone sealant for Seychelles Manufacturer

Short Description:

Description SV – 9300 Fire resistant silicone sealant is a one-component, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.   Where to use It is an ideal material designed for use in fire-stop systems for through penetrations and joints. This product excels in applications where greater water resistance is required e.g. ...


Product Detail

Attentions

Application

Product Tags

We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for 12 Years Manufacturer SV-9300 Fireproof silicone sealant for Seychelles Manufacturer, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.


Description

SV – 9300 Fire resistant silicone sealant is a one-component, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.

 

Where to use

It is an ideal material designed for use in fire-stop systems for through penetrations and joints. This product excels in applications where greater water resistance is required e.g. curtain wall, building facade, expansion/pipe and cable joints.

 

Key Features

1. 100% silicone

2. Excellent weatherproofing and waterproofing

3. Low gas transmission rate

4. With highly efficient redundant

 

Basic Application

1.Building fire seam sealed

2.Building façade

3.cable joints

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Flow, sagging or vertical flow mm 0
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃,50%R.H.
GB/T 531.1-2008 Durometer Hardness Shore A 20-60
GB13477 60% elongation of cementation   no damaging
GB13477 Elongation limit % 120
GB/T 24267 Sealant level   20HM
GB/T 24267 Fire prevention level   FV-0

 

Certification

GB/T 24267-2009

 

Color

Black

 

Package

300ml in cartridge * 24 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Spruce up your outdoor living areas by painting your concrete patio or paths. Hot tips: concrete is porous, so make sure you let it dry fully for a few days in sunny weather after washing it and before you paint!

    What you need:
    - Sugar soap
    - Broom
    - Degreaser – if oil is present
    - Concrete etcher
    - Watering can
    - Paving paint
    - Paint stirrer
    - Turpentine
    - Hogs bristle paint brush
    - Paint roller
    - Paint roller tray
    - Plastic bucket

    Directions:
    Step 1 – Allow new concrete to cure for 12 weeks before painting
    Step 2 – Clean surface with sugar soap
    Step 3 – Rinse with water than allow to dry for two days
    Step 4 – Etch concrete by applying concrete etching solution to concrete then scrub with broom and leave for 20 seconds. Do not leave solution on for more than two minutes.
    Step 5 – Remove all residue with a water blaster or broom, then rinse
    Step 6 – Concrete should now feel like rough sandpaper, if it doesn’t you will need to repeat the process
    Step 7 – Stir paint thoroughly and then pour paint and 10% turpentine into a paint pot for the first coat
    Step 8 – Start by brushing expansion joints and cutting in around edges
    Step 9 – Use paint roller to cover the remaining concrete surface
    Step 10 – Leave to dry overnight and then apply the second coat
    Step 11 – Allow five days for the paint to cure before allowing heavy traffic

    For a full shopping list for this DIY project and many others visit our website at www.paintplace.com.au



    The most common cause of a BMW engine light coming on is a loose fuel cap. An old fuel cap can seize up and no longer “click”. The rubber gasket can also become too compressed to be effective. A quick fix is to spray silicone lubricant (do not use any other kind), into the cap, twist is with your hands a few times until it starts to click again, then flip the rubber gasket upside down. This video shows the steps. Hopefully this will save you some unnecessary trip$ to the dealer.

    Related Products

    WhatsApp Online Chat !