12 Years Manufacturer SV-618 Acetic Glass Sealant to Angola Manufacturer

12 Years Manufacturer
 SV-618 Acetic Glass Sealant to Angola Manufacturer
  • 12 Years Manufacturer
 SV-618 Acetic Glass Sealant to Angola Manufacturer12 Years Manufacturer
 SV-618 Acetic Glass Sealant to Angola Manufacturer
  • 12 Years Manufacturer
 SV-618 Acetic Glass Sealant to Angola Manufacturer12 Years Manufacturer
 SV-618 Acetic Glass Sealant to Angola Manufacturer

Short Description:

Description It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.   Where to use SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painte...


Product Detail

Attentions

Application

Product Tags

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for 12 Years Manufacturer SV-618 Acetic Glass Sealant to Angola Manufacturer, Welcome friends from all over the world come to visit, guide and negotiate.


Description

It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.

 

Where to use

SV-618  is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painted wood.

 

Key Features

1. 100% silicone

2. Easy to apply

3. Highly efficient and safe bactericide

4. Low VOC

5. Proven Performer

 

Technical data sheet

Technical data sheet for reference,

  Test standard 1000
Appearance ISO 11600 Have no grain, no agglomerations
Extrudability,g/ml ISO 8394 450
Tack Free Time,min ASTM C 679 20
Density,g/cm3 ISO 1183 1.0
Slump,mm ISO 7390 0
Heat weight loss,% ISO 10563 7
Ultimate Tensile Strength,MPa ISO 8339 0.4
Ultimate Elongation,% ISO 8339 150
Ultimate Shear Strength, MPa ISO 4587 N/A

 

Certification

JC/T885-2001 20LM; and GB/T1741-2007 Mildew Proofing Grade 0

 

Color

clear, black, silver gray, white

 

Package

300ml in cartridge * 24 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Spruce up your outdoor living areas by painting your concrete patio or paths. Hot tips: concrete is porous, so make sure you let it dry fully for a few days in sunny weather after washing it and before you paint!

    What you need:
    - Sugar soap
    - Broom
    - Degreaser – if oil is present
    - Concrete etcher
    - Watering can
    - Paving paint
    - Paint stirrer
    - Turpentine
    - Hogs bristle paint brush
    - Paint roller
    - Paint roller tray
    - Plastic bucket

    Directions:
    Step 1 – Allow new concrete to cure for 12 weeks before painting
    Step 2 – Clean surface with sugar soap
    Step 3 – Rinse with water than allow to dry for two days
    Step 4 – Etch concrete by applying concrete etching solution to concrete then scrub with broom and leave for 20 seconds. Do not leave solution on for more than two minutes.
    Step 5 – Remove all residue with a water blaster or broom, then rinse
    Step 6 – Concrete should now feel like rough sandpaper, if it doesn’t you will need to repeat the process
    Step 7 – Stir paint thoroughly and then pour paint and 10% turpentine into a paint pot for the first coat
    Step 8 – Start by brushing expansion joints and cutting in around edges
    Step 9 – Use paint roller to cover the remaining concrete surface
    Step 10 – Leave to dry overnight and then apply the second coat
    Step 11 – Allow five days for the paint to cure before allowing heavy traffic

    For a full shopping list for this DIY project and many others visit our website at www.paintplace.com.au

    Related Products

    WhatsApp Online Chat !