12 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B Supply to Florida
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 12 Years manufacturer Siway SV-602 Epoxy Structural Adhesive A/B Supply to Florida, items won certifications with the regional and international primary authorities .For far more detailed information,please contact us!
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
Stone – stainless steel/ Standard conditions | ≥12 | ||||
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing | |||||
attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
Colour | gray | white | grey | ||
Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
Viscosity(PaS) | 200-400 | 150-250 | |||
Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.facebook.com/rtvsilicon
https://twitter.com/Saminaray
OUR MAIN PRODUCTS:silicone rubber,molding silicone,RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber.
Platinum cured silicone ,lifecasting silicone rubber,silicone for lifesize figure .Additional cured silicone rubber.plaster mould reproduce,cement mould reproduce.
silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller
DUCTOLOX 419. Duct Sealing Foam, manufactured by Arjunox Inc. 415-462-9853.
Ductolox 419 is a closed cell, state of the art, two component
expanding foam sealant which cures in 1 to 1.5 minutes and full cure in 12 hours. Excellent for ducts, conduits, risers, rodent pathways and much more. Stops active water flow!. Ductolox 419 is packaged in a patented single caulking tube consisting of a special two part compartment and can be used with any standard quality caulking gun. The patented product
doesnt require an old technology special static mixer attachment and is mixed internally and automatically ready to be dispensed thereby providing a uniform mix and cure.
For use on:
Vaults, Wire Chases, Power Generation Plants, Gas Utilities, Pipes, Conduits, Manholes, Central Offices, Wall Penetrations, Floor Penetrations.
Advantages:
Patented Convenient Two component in a single cartridge tube.
Uses no static mixer nozzle and thus provides uniform mix and cure
Seals active water flow & gases
Minimal or no out gassing. Stays under the PPM allowed for gas readings at seal locations.
Fast Setting & Low Exotherm
Convenient Patented Packaging
Non-Toxic
Non-Flammable
Easily removable & faster re-enter time
Excellent adhesion of conduits, cables sheaths, metals, concrete, plastics and wood
Made for harsh environments
Flows & Foams around all shapes
Usage Directions:
Remove dispensing tube, push break seal down twice to break the compartment seal between two components inside the tube. Reattach dispensing tube and dispense using a quality
caulking gun.
Packaging:
10.3 oz Standard Caulking Tube. Choice of Colors: Yellow, Beige or Green.
Manufacturer: Arjunox Corporation, 6800 Canal Street, Ste 23B, San Rafael, CA 94901
Tel: (415) 462-9853