Special Price for SV-777 silicone sealant for stone Supply to Marseille

Special Price for SV-777 silicone sealant for stone Supply to Marseille
  • Special Price for SV-777 silicone sealant for stone Supply to MarseilleSpecial Price for SV-777 silicone sealant for stone Supply to Marseille
  • Special Price for SV-777 silicone sealant for stone Supply to MarseilleSpecial Price for SV-777 silicone sealant for stone Supply to Marseille
  • Special Price for SV-777 silicone sealant for stone Supply to MarseilleSpecial Price for SV-777 silicone sealant for stone Supply to Marseille

Short Description:

Description SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.   Key Features 1. 100% silicone 2. Minimized fluid migration 3. Low dirt pick up 4. Water &...


Product Detail

Attentions

Application

Product Tags

Our goal is to provide high quality products at competitive prices, and top-notch service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for Special Price for SV-777 silicone sealant for stone Supply to Marseille, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


Description

SV-777 silicone sealant for stone, is an elastomer sealant in modulus, single. Waterproof joints need to be sensitive to natural stone, glass and metal building clean appearance panel for sealing design, it to the moisture in the air after curing in contact, the formation of elastic rubber sealing performance, durability, weather resistance, good combination with most building materials.

 

Key Features

1. 100% silicone

2. Minimized fluid migration

3. Low dirt pick up

4. Water & weatherproof

5. Primerless adhesion to most building materials

6. 25% movement capability

 

Basic Application

1.Stone curtain wall sealing

2.Engineering ceramic sealing

3.Stone and other materials such as glass, metal seam sealing

4.Other uses

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
ASTM C 679 Flow, sagging or vertical flow mm 0
  VOC g/L <80
GB13477 surface drying time(25℃,50%R.H.) min 30
  Curing time(25℃,50%R.H.) Day 7-14
Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃,50%R.H.
GB13477 Durometer Hardness Shore A 30
GB13477 The ultimate tensile strength Mpa 0.7
  Temperature stability -50~+150
GB13477 Movement capability % 25
ASTM C 1248 Pollution / oil, natural stone   No

 

Certification

25HM GB/T 23261-2009;ASTM C920-2011

 

Color

Black,White,Gray

 

Package

300ml in cartridge * 24 per box, 590ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Check out our blog for clickable links to the items below!
    Blog- https://www.heywandererblog.com/2017/06/diy-stock-tank-pool-everything-you-need.html
    Instagram- www.instagram.com/heywanderer
    E-mail- heywanderer@gmail.com

    Things you will need:
    - Stock tank (size of your choosing- ours is 8 ft.)
    - Above Ground Pool Pump
    - Weatherproof Silicone Sealant
    - Hole Saw with Arbor
    - Plunger Valves
    - Pool Outlet
    - 1-3 Rubber Washers (or Gaskets)
    - 1 Strainer Nut

    Other things you will need for maintenance:
    - Chlorine Tablets
    - Floating Pool Dispenser
    - Water Testing Kit

    Step 1- Find a nice level area to lay the stock tank on. If the area where you have chosen isn’t level, use sand or rocks to build up whatever side needs it. It is very important that your stock tank be level so there aren’t any unexpected leaks.
    Step 2- Cut holes in your stock tank. I’m not going to lie- this is a pain in the butt. We bought a hole saw with an arbor and it took two people to get through the metal. You will need two holes, one at the top and one at the bottom. In an above ground pool, these aren’t usually right on top of each other, but ours are. We haven’t ever seen this as a problem.
    Step 3- Start assembling the parts. In the pool pump package there is a packet with instructions, warnings and troubleshooting. This packet proved to be vital in the setup of the pool. I did end up getting 2 gaskets for the bottom section (the drain section), one for the inside of the pool and one for the outside. It only says you need one for the inside, but this was causing a drip for us. I also put thread seal tape around the connections that were closest to the pool. There are a lot of connections, and each one has a gasket, so you could probably get away without the tape. I didn’t put it on all the connections, the only ones that really seemed to matter were the ones that are connecting the hoses to the pool.
    Step 4- Apply silicone waterproof sealant around all crevices involving the input and output parts. I did this on the inside of the pool and the outside. And I applied it VERY HEAVILY and did two layers, allowing one to dry before the second was applied. Sealing these crevices is one of the most important parts. This is what is going to keep the water in the pool. Well all of these steps are leading up to keeping water in the pool, but if there is any chance that it’s going to be getting out, this is what will save you.
    Step 5- Test for leaks. Before I added water to the pool, I took a water bottle and poured a good amount of water on the input and output parts. You could also just use a water hose. I would make sure the hose wasn’t on full blast. You don’t want to accidentally penetrate the sealant.
    Step 6- Once you are sure there aren’t any leaks, fill the pool just above the bottom hole/output. Check again to see if any leaks have started. If there aren’t any, fill the rest of the pool up!
    Step 7- Turn the pump on. Make sure both plunger valves are open/unlocked. When you first do this water may not come out of the output, but there is a solution! Twist off the knob on top of the filter pump to let some air out. Some water may escape too and that’s okay, just be ready to screw it back on as soon as the water starts coming out.



    This Old House general contractor Tom Silva installs a new range vent hood. (See below for a shopping list and tools.)

    Click here to SUBSCRIBE to the official This Old House YouTube channel: https://www.youtube.com/subscription_center?add_user=thisoldhouse

    How to Vent a Bath Fan Through the Roof: https://www.youtube.com/watch?v=PqrZWd_CQIE&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=164

    How to Install a Pellet Stove: https://www.youtube.com/watch?v=Da4kJGuSzNI&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=53

    How to Install a Linoleum Tile Floor: https://www.youtube.com/watch?v=rtyBHAt5Rkg&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=6

    Shopping List for How to Install a Range Vent Hood:
    - range vent hood
    - 6-inch-diameter metal ductwork and assorted fittings, for connecting vent hood to vent cap
    - duct tape
    - PVC trim
    - self-tapping screws
    - silicone adhesive
    - twist-on wire connectors

    Tools for How to Install a Range Vent Hood:
    - drill/driver
    - 6-inch-diameter hole saw, used to cut hole in wall for duct
    - wet/dry vacuum
    - oscillating multi-tool
    - 1/4-inch-diameter drill bit
    - angle grinder
    - caulk gun
    - wire strippers

    Follow This Old House:
    Facebook: https://www.facebook.com/ThisOldHouse
    Twitter: https://twitter.com/thisoldhouse
    Pinterest: https://www.pinterest.com/thisoldhouse/
    G+: https://plus.google.com/+thisoldhouse/posts
    Instagram: https://instagram.com/thisoldhouse
    Tumblr: https://thisoldhouse.tumblr.com/

    Related Products

    WhatsApp Online Chat !