Professional High Quality Siway PU FOAM to Denmark Factory

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Professional High Quality Siway PU FOAM to Denmark Factory, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!

Description

This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength;

Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins;

Key Features

1. Noise silencing effect

2. Strong bonding strength

3. Water & weatherproof

4. Primerless adhesion to most building materials

Basic Application

1.Doors and Windows and wall body between the gap filling sealing, fixed bond

2.Language lab, studio, etc when decorating, gap to fill

Technical data sheet

Certification

JC 936-2004

Color

White

Package

750ml in Bottle * 12 per box

Shelf life

12 months

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

Foundation Waterproofing.
Click here: https://amzn.to/1Pcgf3o .

I bought Rubberseal Roll On to coat the inside of a plywood vivarium (48″L x 28″width (depth) x 72″H). I needed water resistant top and sides so coated the top half with 1/32 of an inch (30 mil) and the lower half and bottom with a thicker coat of about 1/16 of an inch (60mil) to get a waterproof seal. I used a roller for the top sides and a brush to coat the corners. A brush will let you lay this on thick. I have some very thick areas on the bottom especially in corners where plywood meets the frame. Be aware this takes at least 72 hrs to dry and not be tacky to the touch and depending on thickness can take longer.Other products I used with Rubberseal Roll On:I was concerned that silicone will not adhere to the rubber but it worked beautifully. I used GE 100% Silicone I (black). I added cork sheets to the upper walls and coconut coir over the silicone in other areas.Great Stuff adhered with no problem also. And once carved and shaped you can use the black silicone to blend it in. I used globs on the walls and used them for plant anchor points.Liquid Nails will adhere to the rubber also, but takes a bit for it to get a good grip. you may need to tape things in place till the glue dries.Tips:you may scratch the rubber off the walls with decor (adding large branches and such) if you are not careful. Silicone can touch up these spots or if you have some RubberSeal left over you can re+touchup as needed.Wear gloves as this becomes extremely sticky and buy 3 or 4 cheap paint brushes or rollers for each day you are going to add a coat since the RubberSeal will dry to the brush/roller and make it unusable after a few hours.The one gallon can I bought was just enough for this size build.Read more ›.

1. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On
2. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Roll On 5 GALLON BLACK
3. LastiSeal® Brick & Masonry Sealer (5+gal) | All Purpose Sealer for Brick, Concrete, Stone, & Porous Masonry |…
4. Ames BMX5RG Blue Max Liquid Rubber
5. S2000 Basement Wall & Floor Sealer
6. Hydro+Seal 75 Waterpoofing Epoxy 1 Gallon Kit + Resists over 40 psi, no VOC, Odor Free, Water+based Epoxy. Just…
7. Rubberseal Liquid Rubber Waterproofing and Protective Coating ++ Trowel On 1 Gallon