Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory

Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory
  • Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City FactoryWholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory
  • Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City FactoryWholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory
  • Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City FactoryWholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for Wholesale 100% Original SV-8800 Silicone Sealant for Insulating Glass to Salt Lake City Factory, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Silicone sealant is the most commonly used product for sealing corners on tiled areas, around showers, baths & basins, around worktops, wall & floor joints, door & window frames. However, the application of silicone sealant usually requires a relatively high level of skill to achieve a consistent quality of finish. If applied incorrectly the joint will look poor and waterproofing may be compromised.

    Seal Rite — The New Sealant Masking System from Everbuild Building Products is a dispenser and micro-fine foil masking tape which enables both Tradesmen and DIY’ers to achieve a perfectly finished joint every time, without any level of skill, eliminating both mess and wastage. This new system is designed particularly with corner joints in bathroom/kitchen applications in mind, but equally it can also be used in various other areas.

    The unique adjustable dispenser, which has a patent pending, allows the joint width to be adjusted using the outer wheel of the product — both of these outer sides move simultaneously so that when applied the tape is positioned offset from the wall by the chosen number of millimetres. There are six joint size options ranging from 4mm to 9mm (in 1mm increments).

    Once the joint size has been selected it is easy to run the dispenser down one side of the corner joint, nipping off the tape when the bottom is reached, with the handy cutting blade built into the dispenser. The same is then repeated on the adjoining wall to create the parallel lines to apply the sealant. Once this has been done, the Everbuild Smooth-Out Tool should be used to smooth down the joint before the tape is pulled off leaving The Perfect Seal Everytime.

    For more information on the Seal Rite range or any other product within the Everbuild range please contact your Everbuild Sales Representative, or contact the Everbuild Sales Office on 0113 240 2424. The Seal Rite video is also available to watch on the Everbuild website, www.everbuild.co.uk



    How to vacuum seal mason jars without a vacuum sealer using the hot water bath method.

    Related Products

    WhatsApp Online Chat !