Siway SV-602 Epoxy Structural Adhesive A/B
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Siway SV-602 Epoxy Structural Adhesive A/B, We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
|Shear strength||Stainless steel-stainless steel/Standard conditions||≥18||JC887-2001|
|Pressure shear strength||Stone-stone/ Standard conditions||≥12|
|Stone-stone/ The freeze-thaw cycle 50 times||≥10|
|Stone – stainless steel/ Standard conditions||≥12|
|Standard conditions：Temperature=23℃，relative humidity=50%，48 hours curing|
|Effective operating time(23℃)||N/A||N/A||20min|
Part A-Grey Paste/Part B-White Paste
9kg/9kg per unit and 15kg/15kg per unit
If you want the TDS or MSDS or other details, please contact with our sales person.
Matters needing attention
1, when using Suggestions according to the proportion of fully mixing, proportional deviation is too large or mixed uneven may cause stone yellowing or part of the pollution;
2, this product contains epoxy resin and the amine curing agent are chemicals, construction must take safety measures to avoid contact with eyes or skin patches. In case of skin contact should be timely erase pollutants, wash with water and soap; In case of eye contact, the application of water for 15 minutes, and timely medical treatment;
3, in order to ensure construction safety, rubber curing early not bearing;
4, the SV – 602 suggest the use of the environment temperature is above 10 ℃. At lower temperature suggest user to product slightly heated after use;
Method of use
Surface treatment: to achieve the best effect of using, binding the surface of the parts to do cleaning, remove rust, dirt, grease and other surface dirt, and keep dry. Smooth on MAO.
With glue: according to the need according to the weight or volume ratio 1:1 the right amount of A and B component, fully mixing, blending after the glue should be uniform in appearance.
Glue & binding: the mixture with appropriate tools after adhesive coating on the surface of the be bonded parts of adhesive. Suggest A and B components mix 20 minutes after the effective operating period (23 ℃) finish coating and bonding operation. The higher the temperature, the shorter the applicable period.
The following data for the user reference:
Temperature 25 ℃ under the condition of product in accordance with the proportion of 1:1 realization table dry blend to 45 to 55 minutes, 4 hours after mixing bonding strength can reach regulations of the product inspection standard strength value, achieve full 8 hours after curing strength of 60-70%, basic implementation cured 24 hours a day. The higher the temperature the faster the curing.