Factory directly provide SV-618 Acetic Glass Sealant for Rio de Janeiro Importers
Short Description:
Description It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold. Where to use SV-618 is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painte...
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for Factory directly provide SV-618 Acetic Glass Sealant for Rio de Janeiro Importers, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.
Description
It is one-component acetoxy silicone sealant with fungicide to form a durable and flexible rubber seal resistant to water, mildew and mold.
Where to use
SV-618 is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories. It also has good adhesion to most common building materials e.g. glass, tiles, ceramics and fiber glass, painted wood.
Key Features
1. 100% silicone
2. Easy to apply
3. Highly efficient and safe bactericide
4. Low VOC
5. Proven Performer
Technical data sheet
Technical data sheet for reference,
Test standard | 1000 | |
Appearance | ISO 11600 | Have no grain, no agglomerations |
Extrudability,g/ml | ISO 8394 | 450 |
Tack Free Time,min | ASTM C 679 | 20 |
Density,g/cm3 | ISO 1183 | 1.0 |
Slump,mm | ISO 7390 | 0 |
Heat weight loss,% | ISO 10563 | 7 |
Ultimate Tensile Strength,MPa | ISO 8339 | 0.4 |
Ultimate Elongation,% | ISO 8339 | 150 |
Ultimate Shear Strength, MPa | ISO 4587 | N/A |
Certification
JC/T885-2001 20LM; and GB/T1741-2007 Mildew Proofing Grade 0
Color
clear, black, silver gray, white
Package
300ml in cartridge * 24 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Hongye silicone rubber Model No.: HY-6 series. Eg.: HY-628, HY-638.
Price: 5.98-9.28USD/KG, FOB, by sea/ Shenzhen port
Features of Hongye silicone for mold making:
(1) High tensile & tear strength
(2) High duplication times
(3) Low linear shrinkage
(4) Resistance to high-temperature
(5) Low shrinkage and non-deformation
(6) Resistance to acid-alkali and expansion
Operation instructions for silicon rubber mold making
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes. Otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original mold.
For more information, pls feel free to contact Miss Gloria.
Tel: +86-755-89948006
Fax: +86-755-89948030
Mob: +86-18938867584
E-mail: hyxf@szrl.net
Gmail: gloriachan0901@gmail.com
QQ: 1034964130
Welcome to our website https://www.szrl.net
MDRS-CAP Heat shrink cable end caps, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc.
More details see www.shrinkmarket.com