Professional factory selling SV-8890 Two-component Silicone Structural Glazing Sealant Supply to Italy

Professional factory selling SV-8890 Two-component Silicone Structural Glazing Sealant Supply to Italy
  • Professional factory selling SV-8890 Two-component Silicone Structural Glazing Sealant Supply to ItalyProfessional factory selling SV-8890 Two-component Silicone Structural Glazing Sealant Supply to Italy

Short Description:

Description SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine constructi...


Product Detail

Attentions

Application

Product Tags

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
Professional factory selling SV-8890 Two-component Silicone Structural Glazing Sealant Supply to Italy, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now


Description

SV8890 is neutral curing, designed for glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal designed silicone sealant structure, excellent bonding performance of structure and the weathering resistance, after artificial accelerated weathering test, various physical and chemical properties have no obvious change in the sealant. When using, SV8890 with dedicated two-component glue machine construction, two kinds of components in accordance with the provisions, mixing ratio after curing form elastomer.

 

Key Features

1. None sag

2. Adjustable working time

3. Excellent adhesion to most building substrates

4. High bonding strength and modulus

5.12.5%movement capability

6. Silicone durability

 

Basic Application

1.Glass, stone, marble, granite, aluminum curtain wall and glass daylighting roof and metal structural engineering structural adhesive seal;

2.Insulating Glass of the second seal

3.Many other building and industrial applications

 

Technical data sheet

Test project Unit value
Flow, sagging or vertical flow mm 0
Operating time min 20
surface drying time(25℃,50%R.H.) min 40-60
Durometer Hardness Shore A 20-60
At 23 ℃ maximum tensile strength elongation % ≥100
Tensile strength(23℃) Mpa 0.9
Tensile strength(90℃) Mpa 0.68
Tensile strength(-30℃) Mpa 0.68
Tensile strength(flooding) Mpa 0.68
Tensile strength(flooding – ultraviolet) Mpa 0.68
Bond damage area % 5
Thermal aging(thermal weight loss) % ≤5
Thermal aging(crack)   No
 Thermal aging(efflorescence)   No

 

Certification

GB 16776

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • A simple and very cheap way to make custom shaped moulds for creating simple resin castings with or without an LED embedded into them.
    The mould is based on a popular technique on the Internet which uses common household materials to make good silicone rubber moulds. It’s basically just standard sealant silicone mixed with cornflour (cornstarch) to make a malleable putty into which your master shape is pressed. If using non plastic masters then apply some oil or Vaseline to the object so that the silicone doesn’t stick to it.
    When the mould has cured in an hour or so (but leave overnight if possible) then the master can be removed and the flexible mould can then be used to produce replicas from various resins. I like the simplicity of the two part syringe resins which can be bought at dollar store type shops.
    To embed an LED I prefer to use the shorter “strawhat” 4.8mm LEDs as it helps to keep the chip as far back from the front of the casting as possible for good light distribution. Bend the leads to the side at right angles to the LED so that it can be placed across the top of the mould with the LED submerged in the resin.



    Blahdeblahbleepbleepbloop… Everything is explained in the video. :)

    The wig is from here: https://www.bestremywigs.com

    Other interesting stuff is here:
    Twitter: https://www.twitter.com/petrilude
    Facebook: https://www.facebook.com/petrilude
    Personal Channel: https://www.youtube.com/jerrrsh
    Professional, business, or media inquires only: media@petrilude.com

    Drag Stuff is here:
    Twitter: https://www.twitter.com/misty_maven
    Facebook: https://www.facebook.com/mistyriosmaven
    YouTube: https://www.youtube.com/mistymaven

    Related Products

    WhatsApp Online Chat !