Wholesale Price China Siway SV-602 Epoxy Structural Adhesive A/B to Plymouth Manufacturer
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Wholesale Price China Siway SV-602 Epoxy Structural Adhesive A/B to Plymouth Manufacturer, we have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
Stone – stainless steel/ Standard conditions | ≥12 | ||||
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing | |||||
attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
Colour | gray | white | grey | ||
Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
Viscosity(PaS) | 200-400 | 150-250 | |||
Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
How to Remove Silicone Caulk from Hands
00:00:59 Method 1 Removing Wet Caulk with Plastic
00:01:07 1 – Remove as much of the caulk as you can before it dries
00:02:05 2 – Rub your hands with a plastic bag
00:02:59 3 – Rinse with water
00:03:42 4 – Dry your hands and repeat if needed
00:04:19 5 – Act fast!
00:05:32 6 – Try using a home remedy if dry caulk remains
00:06:19 Method 2 Removing Dry Caulk with a Home Remedy
00:06:27 1 – Try acetone
00:07:39 2 – Try (cautiously) using a hair dryer
00:08:40 3 – Try an abrasive
00:09:45 4 – Try mineral spirits
00:11:04 5 – When all else fails, simply wait
00:12:04 6 – Don’t use harsh solvents
00:12:59 7 – Don’t scrape or gouge the caulk
00:13:45 Tips
00:14:31 Warnings
00:14:50 Things
Content taken from WikiHow https://www.wikihow.com/Remove-Silicone-Caulk-from-Hands
If you pump does not hold prime and the O-ring on your pool sand filter is old and stretched, the O-ring may be leaking air and it may be time to replace it. This video shows you how to replace your pool sand filter’s O-ring.
To view this guide step by step on our website, visit:
https://www.inyopools.com/HowToPage/how_to_replace_the_o_ring_on_a_pool_sand_filter.aspx