OEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi

OEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi
  • OEM Supplier for CV-709 silicone sealant for PV moudels Export to New DelhiOEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi
  • OEM Supplier for CV-709 silicone sealant for PV moudels Export to New DelhiOEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi
  • OEM Supplier for CV-709 silicone sealant for PV moudels Export to New DelhiOEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi

Short Description:

Description CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949   Key Features 1. 100% silicone 2. No sag 3. high thixotropy 4. Water & weatherproof 5. For solar components involved in the base material has good bonding   Basic Ap...


Product Detail

Attentions

Application

Product Tags

"Based on domestic market and expand overseas business" is our development strategy for OEM Supplier for CV-709 silicone sealant for PV moudels Export to New Delhi, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.


Description

CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949

 

Key Features

1. 100% silicone

2. No sag

3. high thixotropy

4. Water & weatherproof

5. For solar components involved in the base material has good bonding

 

Basic Application

1.Solar module frame seal

2.The adhesive of the solar energy back to the terminal block

3.General industrial assembly with seal

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
  specific gravity g/ml 1.34-1.40
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
3 days after curing——25℃,50%R.H.
  Temperature range -55~200
GB13477 Durometer Hardness Shore A 40~55
  The ultimate tensile strength Mpa ≥2
GB13477 Breaking elongation % 300-600
  Aluminum bonding shear strength Mpa ≥1.5
Electrical properties
  Breakdown voltage Kv/mm ≥20
  Volume resistance ohm.cm 9E+14
  Dielectric constant   3.1@50Hz

 

Certification

UL E339949; TUV

 

Color

Black, White

 

Package

300ml in cartridge * 24 per box, 500ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Does the pressure in your Combi boiler or heating system boiler keep dropping? Here’s how to fix it! We’ll show you why it happens, and how to fix it. We’ll show you how the filling loop works with mains pressure, we’ll show you how the expansion vessel works and can fail, how the high pressure relief valve can release pressure and how a lack of inhibitor can cause air and a drop in pressure.

    ***VISIT OUR SPONSORS***
    https://www.traderadiators.com | https://www.grahamplumbersmerchant.co.uk | https://www.buteline.com/uk | https://www.adey.com

    SEE OUR CARDS AND ANNOTATIONS TO FOLLOW ON TWITTER, FACEBOOK AND GOOGLE PLUS!
    ***WEBSITE***

    https://www.plumberparts.co.uk

    So you’ve been noticing lately that the pressure gauge on the front of your boiler that looks very similar to some of the pressure gauges that I’ve got going on behind me at the moment has been dropping down. Now if it goes anywhere below kind of half a bar, then you know that you’ve got a problem and obviously if it’s constantly going down all the time or that recently you’re topping it up using a filling loop like then you’ll know that you’ve definitely got a problem. Now there’s a few things that can cause this and inside a heating system, the cold water atoms and On a pressurized system, instead of having the expansion pipe, you have what’s called an expansion vessel. How they work is very simple. It’s very difficult to compress water and so therefore you have an expansion vessel with a rubber diaphragm and on one side of the diaphragm you have compressed air that’s usually compressed to one or one and a half bar and on the other side you have your heating system water. So as that water heats up and expands, it gets more and more happy, it can expand into the easily compressed air without letting air into the heating system because there’s a rubber diaphragm in the way. So make sure that your heating system is nice and full of water at all times, you have a filling loop that fills up the cold water from the cold water main system and make sure that everything’s okay. So now you’ve got a basic idea about how a pressurized heating system works. Let’s look at problem number one that could cause a pressure drop. Firstly and most obviously of all, you could have a leak on your heating system somewhere. When it comes to finding leaks, the best thing to do is pop around all the radiator valves for a start and just make sure there’s no leaks on them. Make sure you lift up the heads as well to make sure that there’s no weep on top of the valves. Make sure that the compression fittings on each side of the radiator valves are nice and tight and there’s no water anywhere. Just go around, run around with your hands and make sure that you’ve got no leaks there at all. That’s number one on the list. Try and stop the leaks. If you find that you can’t find any leaks anywhere, always look out for sort of dark brown patches on the ceiling. They can indicate leaks. After that, you’re into the gnarly world of pulling up floorboards and having a look under the floor. Things like that can get pretty horrible. So that’s number one. You might actually have a leak on your heating system. Number two, most modern combi boilers have what’s called automatic air vents on them. Now they’re great for when it comes to venting a system out. Everything gets vented automatically and it works brilliantly. But they can cause problems if the heating system hasn’t got an adequate amount of inhibitor in it or if the pump setting is set too high for the speed. Let’s go through both of those quickly now. What an inhibitor does is stops the water from reacting with the inside of the radiators and the inside of the components of the heating system itself. If that’s not in there, you’ve got normal water going up against the insides of a radiator and causing horrible things to happen. Many, many months ago I started an experiment with two jars just like this, one with inhibitor in it and one with just water in it and then popped about 10 nails in each and I think you can see the difference. If I just pop these down so you can have a closer look at them, you can see the different state in the nails and if inhibitor is not inside your radiators, that’s exactly what’s gonna happen to the inside. Now, another byproduct of this is not just sludge and rust that goes around and stops a heating system from working properly, it’s also hydrogen and other gases. What happens is the hydrogen can work its way around to an automatic air vent and the automatic air vent’s just doing it’s job, it’s just sitting there having a nice chilled out day, a little bit of gas comes along and it lets it out quite happily, but what happens then is the pressure drops down on your boiler.



    Are you producing large products or duplicating statue and sculpture? So, you may need silicone molds to help you!
    You could use molding silicone rubber to make any mould you want.Some of the materials you can cast into a silicone mold.
    For example—–Urethane,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),Hydro Cal White,Ultra-Cal 30, Hydro cal, Hydro stone, Cement, concret.
    It also means that you are able to make silicone molds for Sculpture, Statue, Garden stone, Ceiling,Buddhist sculpture, Shoe sole mold, Artificial stone, Cement or concret products, soap, wax, Faux stone, Garden stone, Brick, Ceiling,flower pot, Fountain, GRCC or nice Marble, Buddhist, Shoe sole mold, Smart castings, Candle mold, Resin mold, decoration, chocolate, Dental Cladding stone, Adult doll, Cake mold, Rapid prototyping, Shoe mold,Polyresine, poly resin, gupsum, Epoxy, resin PU, foam Resin, furniture,Column mold, Gypsum mold, Cornice mold, Artificial stone, Casting plaster Molding, Decorative Moldings, Ceiling Domes & Vaults, Silicone sculpture lay, figurative sculpture, Silicone prosthetic mould.

    Model: HY-6 series silicone rubber for mold making
    price: usd 5.8-8.5/ kilogram FOB shenzhen port.
    For more information , pls feel free to contact Ms Mabel
    office no. :0086-755-89212365
    Mob:86-18938867519
    Skype: mabel9166
    Email :hyyd@szrl.net
    Facebook: https://www.facebook.com/?sk=welcome
    Twitter:https://twitter.com/mabel3249

    Related Products

    WhatsApp Online Chat !