Manufacturer of SV-900 Industrial MS polymer silicone sealant Supply to Southampton
Short Description:
Description It is one component, primer less, can be painted, high quality joint sealant based on MS polymer technology, ideal for all sealing and boding on all materials. It is solvent free, environmental protection product. Where to use Sealing and bonding in housing area, bus, train, elevator, air conditioner, ventilation equipment. Used for installing fixed panel frame, windowsill threshold, and suitable for sealing on all materials surface, like painted metal, glass, wood, concret...
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Manufacturer of SV-900 Industrial MS polymer silicone sealant Supply to Southampton, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
Description
It is one component, primer less, can be painted, high quality joint sealant based on MS polymer technology, ideal for all sealing and boding on all materials. It is solvent free, environmental protection product.
Where to use
Sealing and bonding in housing area, bus, train, elevator, air conditioner, ventilation equipment. Used for installing fixed panel frame, windowsill threshold, and suitable for sealing on all materials surface, like painted metal, glass, wood, concrete, marble, natural stone, granite, bricks, mirrors, aluminum, steel, lead, zinc, common plastics, polystyrene, polyurethane and so on. Sealing the joint of ceiling, timber, gaps of water pipe, gutter on roofs, moved rooms, container, marine. Apply for interior and exterior family decoration, like floor adhesive systems, particular for laying floor tiles, suitable for kitchen, bathroom.
Key Features
1. Paint able
2. Sealing most materials
3. Excellent adhesion
Technical data sheet
| Test standard | Test project | Unit | value |
| Before curing——25℃，50%R.H. | |||
| GB13477 | density | g/m³ | 1.40±0.05 |
| GB2793 | Non-volatile components | % | 99.5 |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.14days after curing——25℃，50%R.H. | |||
| GB13477 | Durometer Hardness | Shore A | 32-38 |
| GB13477 | The ultimate tensile strength | Mpa | 2.5 |
| GB13477 | elongation at break | % | 400 |
Color
White, black, grey
Package
300ml plastic cartridges
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
this should answer everyones questions. song is called Dead Presidents III by logic. download logic’s mixtape at https://bit.ly/JxLIir
check out the glass on glass perc vid i have too!
This video tutorial details the process of making a Poly 75-70 polyurethane rubber mold of a concrete stepping stone. In this example, we utilize the “poured block mold technique”, which is considered to be one of the most simple mold making methods.
Although the stepping stones in this scenario can be easily replaced through options at retail stores, this mold making method is great when you have a unique stone that is not replaceable OR when you’d like to produce custom pavers from your original design (made from wood, clay, a printed model, etc.).
A full list of materials and tools used for this project can be found at the end of the video.
The Steps:
1. Select a Model [0:32]
2. Apply a Sealing Agent (Poly PVA Solution) [0:53]
3. Prepare Model and Construct Mold Box [1:24]
4. Apply Release Agent [3:33]
5. Calculate Amount of Rubber Needed for Mold [4:13]
6. Measure, Mix & Pour Mold Rubber [5:03]
7. Demold [6:29]
8. Cast Concrete [7:24]
This tutorial can also be found on the Polytek Blog: https://blog.polytek.com/2014/07/31/how-to-make-a-rubber-mold-to-reproduce-concrete-stepping-stones/
https://www.polytek.com
https://www.facebook.com/polytekdevelopmentcorp
https://www.twitter.com/PolytekUSA
https://www.google.com/+PolytekDevelopment
