General Purpose PU Foam
Deskripsi Singkat:
Description This product is the expansion, moisture curing, has the strong cohesiveness, elastic foam obturator structure; Save work to save time, reduce waste; High bond strength; Bubble can stick in the concrete, wood, metal, plastic, such as base material surface, but not including teflon, silicon resins; Key Features 1. Noise silencing effect 2. Strong bonding strength 3. Water & weatherproof 4. Primerless adhesion to most building materials Basic Application 1.Doors and Windows...
Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for General Purpose PU Foam, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.
Deskripsi
produk ini adalah menyembuhkan ekspansi, kelembaban, memiliki kekompakan yang kuat, struktur busa obturator elastis; Menyimpan pekerjaan untuk menghemat waktu, mengurangi limbah; kekuatan ikatan yang tinggi;
Gelembung dapat menempel di beton, kayu, logam, plastik, seperti permukaan bahan dasar, tetapi tidak termasuk teflon, resin silikon;
Fitur utama
1. Kebisingan membungkam efek
2. kekuatan ikatan yang kuat
3. Air & cuaca
4. primerless adhesi untuk sebagian bahan bangunan
Aplikasi dasar
1.Doors dan Windows dan dinding tubuh antara penyegelan kesenjangan mengisi, obligasi tetap
2.Language lab, studio, dll ketika dekorasi, celah untuk mengisi
lembar data teknis
|
Proyek |
Nilai |
||
|
Kepadatan, Kg / m³, Tidak kurang |
10 |
||
|
konduktivitas termal, 35 ℃, W / (m · K) tidak lebih dari |
0.050 |
||
|
stabilitas dimensi (23 ± 2) ℃, 48, h tidak lebih dari |
5 |
||
|
Suhu Operasional |
-10 ~ + 35 ℃ |
||
|
suhu operasi optimal |
+ 18 ~ + 25 ℃ |
||
|
Kisaran suhu (Setelah menyembuhkan) |
-35 ~ + 80 ℃ |
||
|
kekuatan ikatan tarik kPa Tidak kurang |
plat aluminium |
kondisi standar, 7d |
80 |
|
Perendaman, 7d |
60 |
||
|
piring PVC |
kondisi standar, 7d |
80 |
|
|
Perendaman, 7d |
60 |
||
|
Lempeng semen |
kondisi standar, 7d |
60 |
|
|
kekuatan geser, kpa, Tidak kurang |
80 |
||
|
rasio ekspansi busa, Tidak kurang |
Standar nilai-10 |
||
sertifikasi
JC 936-2004
Warna
putih
Paket
750ml dalam botol * 12 per kotak
kehidupan rak
12 bulan
Catatan
Jika Anda ingin TDS atau MSDS atau detail lainnya, silahkan kontak dengan orang penjualan kami.
Warning
•Keep out of the reach of children.
•Protect from sunlight and do not expose to temperatures exceeding 50℃.
•Do not pierce or burn even a tier use.
•Wear suitable protective gloves and goggles during work.
•NO smoking during work.
•In case of insufficient ventilation, wear respiratory equipment.
•In case of accident, feeling unwell, seek medical advice immediately
(show this label, possible.)
Directions for use
•Surfaces must be clean, free of dust and grease.
•Spraying with water will improve cell structure and adhesion.
•Shake can well for 30 seconds, fix nozzle and spray upside down.
How to use and where to use
Dimana untuk menggunakan
1. Filling the joint of junction box and switch.
2. Filling the gap between aircon and wall.
3. Filling the gap between pipe and wall.
How to use
1. Shake the foam before application.
2. Clean and wet the surface.
3. Install the can and adjust the valve to have suitable extrusion.
4. Extrude the foam to fill the joint from bottom to top.
5. Foam starts to cure after 10 min, and succeeding action can been taken 1 hour later.
6. Cut the residual foam and apply cement, paint or sealant on top.
