Factory making Siway SV-602 Epoxy Structural Adhesive A/B for Oslo Manufacturer
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for Factory making Siway SV-602 Epoxy Structural Adhesive A/B for Oslo Manufacturer, Welcome friends from all over the world come to visit, guide and negotiate.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
Stone – stainless steel/ Standard conditions | ≥12 | ||||
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing | |||||
attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
Colour | gray | white | grey | ||
Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
Viscosity(PaS) | 200-400 | 150-250 | |||
Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.waterproofingfew.com.au
PHONE: 03 8812 2918
Waterproofing membrane for a metal roof created out of shipping containers, quite an unique sort of a job.
Liquid Rubber Waterproofing products.
Special Properties of Liquid Rubberwaterproofing Systems:
- UV resistant
- Rust Protection
- Seamless
- Flexible
- Eco Friendly
-Strong Adherence a
Liquid rubber waterproofing membrane suitable for this type of project, where bonds directly to metal containers. The job was power washed thoroughly before hand, substrate clean and dry. Remaining paint was firmly bonded so suitable to spray over the top.
There were box gathers installed between &linking the shipping containers together – making a water tight roofed area over the complete cafe. These box gathers had to be detailed by hand individually, including air conditioning and ducting etc, all had to be detailed by hand , even the outlets for the storm water going out.
Once these were all detailed, the waterproofing membrane was sprayed on.
We used a Liquid Rubber – a dark grey colour, so reflective to the sun and UV stability.
This waterproofing project was sprayed in the course of one day – approximately 118 square meters and it took about four or five hours to complete the job after cleaning. So fairly quick and efficient. This coating approximately 1.5 mm overall, though with detailing built up to approximately 2 mm, maybe 2.2 mm.Highly flexible membrane will move with heat &contraction of the metal roof. This is one of the most devastating scenarios for most waterproofing membranes. Movement and heat causes cracks to evolve and obviously leading to a leaking membrane.
With Liquid Rubber that doesn’t happen as it is highly flexible, the membrane will move with the whole structure and building -keep it all water tight.
https://waterproofingfew.com.au
PHONE: 03 8812 2918
This is a work in progress vid of my new silicone zombie mask project
I will start the mould for it after xmas and the finished mask should be available shortly after that
let me know what you think:-)