Wholesale Price China Siway SV-602 Epoxy Structural Adhesive A/B to Plymouth Manufacturer
Short Description:
Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion. Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Wholesale Price China Siway SV-602 Epoxy Structural Adhesive A/B to Plymouth Manufacturer, If you are interested in our products, please feel free to send us your inquiry. We sincerely hope to establish win-win business relationships with you.
Description
SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.
Key Features
1. Room temperature curing Epoxy adhesive
2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)
3. Mix ratio of 1:1 by volume or by weight
4. Good mechanical property
5. Bonds a wide variety of building materials
6. Good waterproofing and chemical resistance
Basic Application
1, the external walls of stone material, ceramic and other hang bond;
2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;
3, concrete, stone and so on crack repair;
4, the structure of the localization, anchor, reinforcement and reinforcement.
Technical data sheet
The following data is for reference only and is not recommended for the specification
Shear strength | Stainless steel-stainless steel/Standard conditions | ≥18 | JC887-2001 | ||
Pressure shear strength | Stone-stone/ Standard conditions | ≥12 | |||
Stone-stone/ The freeze-thaw cycle 50 times | ≥10 | ||||
Stone – stainless steel/ Standard conditions | ≥12 | ||||
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing | |||||
attribute | SV-602-A | SV-602-B | SV-602(After mixing) | ||
Colour | gray | white | grey | ||
Density(g/cm³) | 1.8 | 1.8 | 1.8 | ||
Viscosity(PaS) | 200-400 | 150-250 | |||
Effective operating time(23℃) | N/A | N/A | 20min | ||
Certification
JC 887-2001
Color
Part A-Grey Paste/Part B-White Paste
Package
9kg/9kg per unit and 15kg/15kg per unit
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Read the whole article with the stills that this video mentions over on FliteTest
https://www.flitetest.com/articles/polyurethane-treatment-of-dollar-store-foam-core
Here I test the application of oilbased (NOT WATERBASED) Minwax polyurethane brush/wipe on coating on dollar store (ADAMS) foam core. This is done specifically for preparing foam core RC models for paint. Half of the test piece is treated while the other half is left untreated. Both sides are then painted with premium and cheap spraypaint, brush on acrylic (as a demonstration of what not to do) and misted heavily with water.
This is a followup to the technique shown on Flite Test
https://www.flitetest.com/articles/polyurethane-treatment-of-dollar-store-foam-core
Follow up video of this treatment on a completed FT Nutball airframe: