Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers

Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers
  • Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand ManufacturersCustomized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers
  • Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand ManufacturersCustomized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers
  • Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand ManufacturersCustomized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers

Short Description:

Description CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949   Key Features 1. 100% silicone 2. No sag 3. high thixotropy 4. Water & weatherproof 5. For solar components involved in the base material has good bonding   Basic Ap...


Product Detail

Attentions

Application

Product Tags

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Customized Supplier for CV-709 silicone sealant for PV moudels to Thailand Manufacturers, We warmly welcome business partners from all walks of life, expect to establish friendly and cooperative business contact with you and achieve a win-win goal.


Description

CV709 is a high-performance silicone sealant, one-component oxime type room temperature curing silicone rubber, has excellent weather resistance, high thixotropy, after curing for solar components involved in the base material has good caking property, by TUV for environmental requirements of the ROHS, UL E339949

 

Key Features

1. 100% silicone

2. No sag

3. high thixotropy

4. Water & weatherproof

5. For solar components involved in the base material has good bonding

 

Basic Application

1.Solar module frame seal

2.The adhesive of the solar energy back to the terminal block

3.General industrial assembly with seal

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
  specific gravity g/ml 1.34-1.40
GB13477 Operating time min 15
GB13477 surface drying time(25℃,50%R.H.) min 40-60
3 days after curing——25℃,50%R.H.
  Temperature range -55~200
GB13477 Durometer Hardness Shore A 40~55
  The ultimate tensile strength Mpa ≥2
GB13477 Breaking elongation % 300-600
  Aluminum bonding shear strength Mpa ≥1.5
Electrical properties
  Breakdown voltage Kv/mm ≥20
  Volume resistance ohm.cm 9E+14
  Dielectric constant   3.1@50Hz

 

Certification

UL E339949; TUV

 

Color

Black, White

 

Package

300ml in cartridge * 24 per box, 500ml in sausage *20 per box

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Waterproof garments can lose their water repellency as dirt and oil break down the water repellent coating. If you notice that the fabric of your jacket is absorbing rather than repelling water, it may be time to reproof it.

    1. Always wash your waterproof jacket first before re-proofing.

    2. There are two types of clothing proofer to choose from; wash in or spray on. You will first need to decide which is most appropriate for you. Our proofers should not alter the look or handle of the fabric. It is however recommended that the products are tried on a small, inconspicuous test area before spraying on or washing into the garment.

    3. If using a wash in proofer, such as our Performance Proofer, first pour the appropriate amount of the proofer into the detergent compartment. For the Performance Proofer this will be two caps full for one jacket and three caps full for two. Allow the washing machine to run through the complete wash and rinse cycle at 30 degrees. Heat helps to activate the product, so if the jacket’s care instructions allow it you can tumble dry the jacket on a low or medium heat.

    4. If you’re using a re-proofer spray, such as our Technical Proofer, spray the product evenly on the outside of the jacket from approximately 15-20 cm away. Hanging the jacket on a washing line when spraying with the proofer will help maintain an even coating. Check the jacket carefully to ensure no areas of the fabric have been missed and wipe off any excess with a damp cloth. Allow the jacket to dry naturally. For high abrasion areas such as the elbows and shoulders, it’s recommended that a second coat of proofer is applied. Again, allow to dry naturally.

    Shop: https://bit.ly/1fMaeAs



    https://www.sincosilicone.com/
    Email: info@sincosilicone.com

    Could I make customized rubber products?
    Yes, we can make customized rubber prdocuts according to your drawings or samples.

    How to get a quotation fast?
    With detail information such as material, hardness, color, size, annual quantity or photos
    we could quote for you within 12 hours. Detail drawings are the best.

    Related Products

    WhatsApp Online Chat !