8 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Latvia Manufacturers

8 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Latvia Manufacturers
  • 8 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Latvia Manufacturers8 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Latvia Manufacturers

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for 8 Years Manufacturer Siway SV-602 Epoxy Structural Adhesive A/B for Latvia Manufacturers, We, with open arms, invite all interested buyers to visit our website or contact us directly for further information.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • Carlisle is the trusted provider of energy saving construction material solutions. With it’s HVAC division and specifically the Hardcast Spray Seal sprayable duct sealant the bar has been raised for both building and contractor installation efficiency. This product is “revolutionizing the way we seal and test the ductwork” Mark Spiezio, Mid Atllantic Mechanical. Carlisle also offers the only proven, award winning solution and has the industries only issued warranty for this type of solution. The trusted provider of these products has now backed it with a 5 year warranty. Building efficiency is dependent on air tight duct work. Contractors using Spray Seal are seeing close to zero CFM leakage in the duct sections. System efficiency can be improved up to 30% with this product. Spray Seal also allows the fastest and most cost effective method of sealing for the contractor. This efficiency encourages full testing of the duct work which in turns helps to insure air tight ductwork. By using Carlisle HVAC Hardcast Spray Seal a building owner can be assured that their investment in more efficient equipment and better system controls and monitoring actually can provide what has been promised. Carlisle HVAC is part of the NYSE traded Carlisle Companies (CSL.)



    Pur sealing er en unik pakningsmetode som limes direkte på emnet uden behov for svejste kanter eller ombuk til montage.

    Sealingen er fødevareegnet, UL godkendt, oliebestandig samt brandhæmmende og har i modsætning til en konventionel gummiprofil ingen samlinger eller behov for manuel montage.

    I Scandiloc udfører vi mange små og mellemstore serier fra dag til dag og med PUR sealing giver det væsentligt mere potentiale i forhold til den geometriske problematik, der kan være ved manuel påsætning af pakningen.

    Kontakt Scandiloc for mere info.

    Related Products

    WhatsApp Online Chat !