28 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Malaysia Factories

28 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Malaysia Factories
  • 28 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Malaysia Factories28 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Malaysia Factories

Short Description:

Description SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.   Key Features 1. Room temperature curing Epoxy adhesive 2. Fast cure at room temperature,...


Product Detail

Attentions

Application

Product Tags

Bear "Customer first, Quality first" in mind, we work closely with our customers and provide them with efficient and professional services for 28 Years Factory Siway SV-602 Epoxy Structural Adhesive A/B for Malaysia Factories, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.


Description

SV-602 is a 2-part structural epoxy adhesive developed for such application as dry fixing cladding. It has strong adhesion to metals, woods, reinforced plastics stone, ceramic and masonry. It is the best choice for bonding parts which must withstand weather, moisture and temperature fluctuations. SV-602 will adhere with minimum surface preparation and has a low coefficient of expansion.

 

Key Features

1. Room temperature curing Epoxy adhesive

2. Fast cure at room temperature, <40 min for reaching a tack-free status under standard environment (STD: 23℃, 50% humidity)

3. Mix ratio of 1:1 by volume or by weight

4. Good mechanical property

5. Bonds a wide variety of building materials

6. Good waterproofing and chemical resistance

 

Basic Application

1, the external walls of stone material, ceramic and other hang bond;

2, concrete, ceramics, stone, wood and other prefabricated split, bonding and jointing;

3, concrete, stone and so on crack repair;

4, the structure of the localization, anchor, reinforcement and reinforcement.

 

Technical data sheet

The following data is for reference only and is not recommended for the specification

Shear strength Stainless steel-stainless steel/Standard conditions ≥18   JC887-2001
Pressure shear strength Stone-stone/ Standard conditions ≥12
Stone-stone/ The freeze-thaw cycle 50 times ≥10
Stone – stainless steel/ Standard conditions ≥12
Standard conditions:Temperature=23℃,relative humidity=50%,48 hours curing
attribute SV-602-A SV-602-B SV-602(After mixing)
Colour gray white grey
Density(g/cm³) 1.8 1.8 1.8
Viscosity(PaS) 200-400 150-250  
Effective operating time(23℃) N/A N/A 20min
           

 

Certification

JC 887-2001

 

Color

Part A-Grey Paste/Part B-White Paste

 

Package

9kg/9kg per unit and 15kg/15kg per unit

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • In this video I demonstrate the basics of how to lacquer, oil or varnish your wooden floors.

    https://www.howtosandafloor.com/how-to-lacquer-or-oil-a-wood-floor/

    Lacquering wood floors is relatively easy when you know how. There are benefits to years of practice, but with just a few nudges in the right direction you can achieve 80%+ of the quality of finish as a professional floor finisher.

    If you are lacquering or varnishing your wood floors, then I would suggest using a high quality medium pile roller (no loss).

    For oiling wood floors, I would suggest using a short pile roller (again high quality) because a coat of oil with a medium pile roller can take days to dry.

    As demonstrated by the video you want to start applying the floor finish of your choice in the corner furthest from the door. Brush the lacquer on as if you were cutting in when decorating, then apply the lacquer, oil or varnish with the roller, keeping within the lines of the with you have chosen to lacquer.

    Once you have completed one row, you go back to the other end of the room and start again. Keep applying strips of lacquer around 24 to 36 inches wide until you are right in front of the door. You then do the same again but you only apply a little at a time as you work your way out of the door.

    Always check these instructions with what is written on the tin. There are many different techniques. Some oils are trowelled on and then buff to shine.

    If you have any questions (or criticisms!) you can ask them below or on the associated article linked at the top of this description.

    Related Products

    WhatsApp Online Chat !