22 Years Factory SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers

22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers
  • 22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers
  • 22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers
  • 22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers22 Years Factory
 SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers

Short Description:

Description SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.   Where to use It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.   Key Features 1. High Modulus 2. UV resistance 3. Low vapor and gas transmission 4. Primerless adhesion...


Product Detail

Attentions

Application

Product Tags

Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 22 Years Factory SV-8800 Silicone Sealant for Insulating Glass to Brasilia Manufacturers, Welcome any inquiry to our company. We will be glad to establish friendly business relationships with you!


Description

SV-8800 is two components, high modulus; neutral curing silicone sealant specifically developed for assembly of high performance insulated glass units as secondary sealing material.

 

Where to use

It is a two-component silicone that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.

 

Key Features

1. High Modulus

2. UV resistance

3. Low vapor and gas transmission

4. Primerless adhesion to coated glass

5. 100% compatible to SV-8890

 

Technical data sheet

Test standard Test project Unit value
Before curing——25℃,50%R.H.
GB13477 Specific gravity(After mixing)   1.33
GB13477 Operating time min 20-40
GB13477 surface drying time(25℃,50%R.H.) min 80-188
corrosivity     No
7 days after curing——25℃,50%R.H.
GB/T 531 Durometer Hardness Shore A 40
GB13477 The tensile modulus at 12.5% elongation Mpa 0.18
  The ultimate tensile strength Mpa 0.92
GB13477 Elongation limit (fracture) % 150

 

Certification

GB-24266-2009;

 

Color

Component A(Base) – White, Component B(Catalyst)- Black

 

Package

1. Component A(Base): (190L), Component B(Catalyst) (18.5L)

2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)

 

Shelf life

12 months

 

Note

If you want the TDS or MSDS or other details, please contact with our sales person.

  • Previous:
  • Next:



  • START TO FNISH – Time Lapse photography and commentary showing how to install a right-hand inswing patio door.

    The opening for this door was 72″ wide by 80″ tall. This leaves 1/2″ around the door for adjustments.
    1. Install a wood sill and framing in the opening if needed to achieve the correct sized opening.
    2. Place lots of caulk or sill pan on the concrete. The sill pan must be used in some wood construction installations if water may seep through the patio door joints.
    3. When placing the patio door, check the bottom and top plates to make sure it is level. Make sure the door jamb is plumb on both sides, meaning that the door is plumb in and out of the opening and left and right of the opening.
    4. Place shims under the left or right door jamb to level the door. Place shims behind all the hinges and any other large gaps that are required to create an even reveal around the doors. Use plastic shims so that water will not affect them.
    5. Install two long screws in the top hinges to attach the doors to the existing structure. This will help keep the doors structurally in place.
    6. Run caulk around the threshold, trim, and any other gaps where water may enter. Fill other gaps with window foam insulation.
    7. Install case molding around the door for a finished look.

    The install time took me 5 hours because I had two old patio sliding doors to remove and plenty of prep work such as removing the old caulking and throwing away the old patio doors.



    This Tutorial will show you the basic tricks to DIY Shoe Repairs
    Sole and Heel a pair of shoes

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House