17 Years Factory SV-999 Structural Glazing Silicone Sealant for Brasilia Manufacturers
Short Description:
Description SV – 999 silicone structural sealant is a one-component, neutral curing, designed for glass curtain wall, aluminum curtain wall, glass daylighting roof and metal structural engineering structural assembly silicone sealant. Show the effective physical properties and bonding performance Key Features 1. 100% silicone 2. No sag 3. Strong bonding strength 4. Water & weatherproof 5. Primerless adhesion to most building materials 6. 25% movement capability Basic Application...
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for 17 Years Factory SV-999 Structural Glazing Silicone Sealant for Brasilia Manufacturers, Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.
Description
SV – 999 silicone structural sealant is a one-component, neutral curing, designed for glass curtain wall, aluminum curtain wall, glass daylighting roof and metal structural engineering structural assembly silicone sealant. Show the effective physical properties and bonding performance
Key Features
1. 100% silicone
2. No sag
3. Strong bonding strength
4. Water & weatherproof
5. Primerless adhesion to most building materials
6. 25% movement capability
Basic Application
1.Glass curtain wall, aluminum curtain wall structure adhesive seal
2.Glass daylighting roof, metal structure engineering
3.Insulating glass bonding
Technical data sheet
| Test standard | Test project | Unit | value |
| Before curing——25℃，50%R.H. | |||
| specific gravity | g/ml | 1.40 | |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | Operating time | min | 15 |
| GB13477 | surface drying time（25℃，50%R.H.） | min | 40-60 |
| Sealant curing speed and operating time will have different with different temperatures and temperature, high temperature and high humidity can make sealant curing speed faster, rather low temperature and low humidity are slower.21 days after curing——25℃，50%R.H. | |||
| GB13477 | Durometer Hardness | Shore A | 40 |
| The ultimate tensile strength | Mpa | 1.3 | |
| GB13477 | Tensile strength（23℃） | Mpa | 0.8 |
| GB13477 | Tensile strength（90℃） | Mpa | 0.5 |
| GB13477 | Tensile strength（-30℃） | Mpa | 0.9 |
| GB13477 | Tensile strength（flooding） | Mpa | 0.6 |
| GB13477 | Tensile strength（flooding – ultraviolet） | Mpa | 0.6 |
Certification
GB 16776；ASTM C1184
Color
Black
Package
300ml in cartridge * 24 per box, 500ml in sausage *20 per box
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
https://www.sincosilicone.com/
Email: info@sincosilicone.com
noctilucent Silicone Rubber from the China wholesale
This video show us how to use the liquid silicone rubber to make mould by pouring way.
A. The operation of pouring way
Pouring way is suit for the product with the smooth surface and simple pattern, no need mold line. The soft silicone rubber will be choose for pouring operation, easy operation and demould, won’t destroy the original mold.
Step 1 Handle the original mold
Choose a prefect original mold, Manually polish and smooth the model, clean the surface and dry it. Fixed the original mold in a smooth wooden board, and using 4 pieces wooden board around it to make a square frame
Brushing the release agent evenly on the surface of original mold and wooden board.
4 kinds release agent we often used in condensation silicone mold: Vaseline, soap water, detergent, liquid paraffin.(silicone oil also can be used as release agent)
Step 2 Weight part A & part B according to the mix ratio recommended
Weighting two parts in Electronic scale with mix ratio 100:2 or 100:5.
Eg: Take 100g part A and 2g part B
Step 3 Stirring evenly
Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and bring problems in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 4 Vacuum pumping
For releasing the air bubbles, after mixing evenly, put the mixture in to vacuum pumping for 3-5 minutes, without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 5 Pouring
Pouring the silicone rubber to the frame from a corner, make the silicone rubber flow to the frame smooth.
Step 6 demoulding
After 3-5 hours later, can demould the silicone mold, It’s will be better for mold to demould after 24 hours
Please don’t hesitate to ask for more information if you have any questions , here Miss Carrie is at your service:
Tel: +86 -0755-89948019
Fax: 86-755-89948030
Mob: 86-18938861895
Whats App:0018938861895
QQ: 2355542537
E-mail: jpp(at)szrl.net
Website: https://www.szrl.net
