11 Years Manufacturer SV-8000 PU Sealant for Insulating Glass to Madagascar Importers
Short Description:
Description SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly. Where to use It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU. Key Fe...
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for 11 Years Manufacturer SV-8000 PU Sealant for Insulating Glass to Madagascar Importers, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Description
SV – 8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
Where to use
It is a two-component PU sealant that offers variable work life with high bonding strength to maintain the integrity of insulating glass unit, suits both commercial and residential IGU.
Key Features
1. High Modulus
2. UV resistance
3. Low vapor and gas transmission
4. Primerless adhesion to coated glass
Technical data sheet
| Test project | standards | Value |
| Sagging degree (mm) | ≤3 | 0 |
| Operating time | ≥30 | 30 |
| Thermal weight loss(%) | ≤10 | 2 |
| Durometer Hardness Shore A | 20-80 | 42 |
| tensile propcrties（MPA） | ＞0.4 | 1.0 |
| Bond damage area（5%） | ≤5 | 0 |
Certification
GB-24266-2009;
Color
Component A(Base) – White, Component B(Catalyst)- Black
Package
1. Component A(Base): (190L), Component B(Catalyst) (18.5L)
2. Component A(Base):24.5kg (18L), Component B(Catalyst): 1.9kg (1.8L)
Shelf life
12 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
I show you exactly how to fix a flat car tire that was punctured by a screw using a rubber plug repair kit. You can find a tire repair plug kit at Amazon (affiliate link):
https://amzn.to/2sQI5Sd
The rubber plugs can be applied to the tire while it is mounted on the vehicle if you are able to reach the damaged area. I recommend you remove the tire for the repair, this will make the damage easier to get to and therefore more likely you will apply the plug correctly and it is safer.
The first step is to locate the offending foreign object in your tire. Remove the object, usually a screw of nail. Use a reamer tool to prepare the hole for rubber string plug. Insert the reamer probe tool into the puncture. Work the probe in and out while twisting to clean and prep the puncture hole. This process will also enlarge the hole to that the rubber string plug will fit through.
Take each end of the repair strip, this is the plug, and roll the center of the strip into the needle eye. Apply dabs of rubber cement to the end of the needle and push the needle into the puncture leaving about a quarter inch above the surface of the tire. The needle can be difficult to push through depending on the size of the puncture.
Twist the handle a quarter turn and pull the needle out of the tire, the plug should not come out with the needle. Now cut the remaining plug down to about 1/8 of an inch with a razor or scissor. Done.
B.G. Peck the leader in Metal stamping, Die Cutting, Laser Cutting, Water Jet Cutting and EDM Machining. Info@BGPeck.com, 978 686-4181.
