11 Years Factory Siway two component strength-basded ceramic tile sealant for Macedonia Factory

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for 11 Years Factory Siway two component strength-basded ceramic tile sealant for Macedonia Factory, We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.

Product introduction

Siway two component strength-basded ceramic tile sealant is an upgraded version of epoxy common beauty gap sealant, excellent toughness and impact resistance, surface brightness, such as porcelain, efficient, durable antibacterial mouldproof, waterproof sealing, 100% do not flow, construction simple, harmful index is far lower than the standard “GB18583-2008″ interior decoration, etc. Is widely used in high-grade kitchen, sanitary ware, high-grade family is decorated in joint seal and hotel decoration,, without excitant or unpleasant smell, in use process to bring you new construction concept and aesthetic effect.

Note: the position of construction

1, metope and floor, metope and mesa, and side beams and floor juncture

2, square face plate around the seams with mesa

Around 3, round face and mesa juncture, circular beams and floor juncture

4, around the toilet clean and floor juncture

5, wooden door and floor juncture

In 6, the tub edge or metope seams with mesa

Scope of application

1, window, furniture and so on, all kinds of counter aperture, cabinets, all kinds of edges, kitchen toilet all kinds of edges, can also be used to paste all kinds of hard materials.

In 2, the guesthouse, hotel, family bath crock, implement, sink, shower room and xiancai basins of installation, waterproof, plugging and other kitchen ware and decorative processing.

Method of use

1, clean the construction surface, remove dirt, oil and other impurities, then along the hem the ceramic tile with crepe paper.

2, mount rubber mouth, combined with glue gun, glue mouth mouth before the glue to glue on the glue, the glue liquid located in cement mix, edging out front a small amount of adhesive solution, in order to avoid mixed uneven, lead to not curable, and then into the ceramic tile aperture.

3, scrape to evenness with blade, slight trim the edges.

4, this product operation time 30 minutes, 4-6 hours at 25 ℃ room temperature curing, 24 hours of maximum intensity.

Describes how to use Mohawk Lacquer for Brass.

For more information, or to order:

https://amzn.to/1N8ynwG

Will keep your brass and brass plated metal surfaces brillant. Keeps metal bright and new looking. Prevents tarnishing, protects. It is a water clear, non-yellowing and durable coating. Adhesion is excellent to metal surfaces.

Directions

Note:

As the name suggests, this is a lacquer for metals such as brass. The lacquer contains an anti-tarnish additive to keep metals bright, clean and looking new longer.

Step 1
Make sure the parts to be sprayed are clean.

Step 2
Shake the can vigorously for at least one minute after the mixing ball rattles to ensure that the lacquer is mixed properly and to prevent clogging.

Step 3
To avoid overspray, if the part to be sprayed is attached to a piece of furniture such as brass drawer handles or hinges, remove the part before spraying.

Step 4
To spray, point the opening of the spray button toward the object, holding the can 12 to 14 inches away from surface. Then press the spray button firmly. Use steady even strokes while spraying. Several thin coats will result in a better finish than one heavy coat.

Step 5
Allow the coating to become tacky between coats.

Step 6
Generally 3 light coats are plenty for coating a metal part.

Step 7
When the can is empty, discard the can in a trash pick-up. DO NOT place it in a home compactor and do not burn it.

OMEGA technology’s development of a silicon balance spring ensures outstanding resistance to shock. Thanks to the incredible resilience and stability of the silicon balance spring, OMEGA luxury watches are now able to achieve truly outstanding levels of chronometric performance. In addition, the durability offered by the combination of OMEGA Co-Axial movements and the silicon balance spring enables the Swiss watchmaker to offer a full four-year warranty on each Co-Axial watch equipped with a silicon balance spring. This new film focuses on the production of the silicon balance spring and the qualities that contribute to its outstanding stability and performance.

https://www.omegawatches.com/4year