100% Original Factory SV-312 Polyurethane Sealant for Windshield Glazing for Iraq Manufacturers
Short Description:
Description SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair. It allows a drive away time of 6 hours in vehicles with or without airbag. *Providing the ambient temperature is at least 23°C and relative humidity 50 %. At lower temperatures and humidities drive away time will be...
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 100% Original Factory SV-312 Polyurethane Sealant for Windshield Glazing for Iraq Manufacturers, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.
Description
SV-312 is an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.
It allows a drive away time of 6 hours in vehicles with or without airbag.
*Providing the ambient temperature is at least 23°C and relative humidity 50 %.
At lower temperatures and humidities drive away time will be longer.
Where to use
Bonding and sealing for windshield glass, glass fiber reinforced plastic fittings, steel and aluminum board of automobiles.
Key Features
a. Fast curing under room temperature, no sagging, solvent free
b. High bonding strength,
c. Good chemical and water resistance
d. No conductive
e. Excellent noise, vibration and impaction resistance
f. Automotive OEM quality
Technical data sheet
Test standard | Test project | Unit | value |
GB13477 | Flow, sagging or vertical flow | mm | 0 |
GB13477 | surface drying time(25℃,50%R.H.) | min | 30 |
Curing speed | mm/24h | 3 | |
GB/T 531.1-2008 | Durometer Hardness | Shore A | 45 |
GB/T 2793 | Non-volatile components | % | ≥96 |
GB/T 528 | The tensile strength | Mpa | 2.5Mpa |
GB/T 528 | Elongation at break | % | ≥400% |
GB/T 528 | Tear strength | N/mm | ≥5.0 |
Color
White, black, grey
Package
300ml plastic cartridges and 600ml in sausage
Shelf life
9 months
Note
If you want the TDS or MSDS or other details, please contact with our sales person.
Kent demonstrates the difficulty of getting servos out of foam models that have been “over glued” in place. He goes over a number of different options you could use and then shows his preferred method of gluing a servo in place on his own L-39 50mm EDF. The goal should be to make the servo easy to remove!
I’ve used various end grain sealers during my years in woodturning. Recently, I started using Titebond woodworkers’ glue for sealing logs, and it is the best thing …